Interlogix NS4702-24P-4S-4X Скачать руководство пользователя

Страница: 281 / 432

281



Key

The secret key - up to 63 characters long - shared between the RADIUS server

and the switch.



NAS-IP-Address

The IPv4 address to be used as attribute 4 in RADIUS Access-Request packets.

If this field is left blank, the IP address of the outgoing interface is used.



NAS-IPv6-Address

The IPv6 address to be used as attribute 95 in RADIUS Access-Request

packets. If this field is left blank, the IP address of the outgoing interface is used.



NAS-Identifier

The identifier - up to 253 characters long - to be used as attribute 32 in RADIUS

Access-Request packets. If this field is left blank, the NAS-Identifier is not

included in the packet.

Server Configuration

The table has one row for each RADIUS Server and a number of columns, which are:

Object

Description



Delete

To delete a RADIUS server entry, check this box. The entry will be deleted during

the next Save.



Hostname

The IP address or hostname of the RADIUS server.



Auth Port

The UDP port to use on the RADIUS server for authentication.



Acct Port

The UDP port to use on the RADIUS server for accounting.



Timeout

This optional setting overrides the global timeout value. Leaving it blank will use

the global timeout value.



Retransmit

This optional setting overrides the global retransmit value. Leaving it blank will

use the global retransmit value.



Key

This optional setting overrides the global key. Leaving it blank will use the global

key.

Buttons

: Click to ad

d a new RADIUS server. An empty row is added to the table, and the RADIUS

server can be configured as needed. Up to 5 servers are supported.

Содержание NS4702-24P-4S-4X

















































































































































































































































































































































































































































Результаты поиска

Содержание NS4702-24P-4S-4X

Отзывы:

Похожие инструкции для NS4702-24P-4S-4X

Бренды по названию

Популярные бренды

Interlogix NS4702-24P-4S-4X, Руководство пользователя

Результаты поиска

Содержание NS4702-24P-4S-4X

Отзывы:

Похожие инструкции для NS4702-24P-4S-4X

Бренды по названию

Популярные бренды