Interlogix NS3562-8P-2S, Руководство пользователя

Страница: 42 / 245

Chapter 4: Web configuration
40 NS3562-8P-2S User Manual
The page includes the following fields:
Item Function
Auto Configuration Selec t Enable to enable IPv6 auto-configuration.
If it fails, the configured IPv6 address is zero. The router may delay
responding to a router solicitation for a few seconds; the total time needed
to complete auto-configuration can be significantly longer.
IPv6 Address Provide the IPv6 address of this switch.
IPv6 address is in 128-bit records represented as eight fields of up to four
hexadecimal digits with a colon separating each field (:). For example,
fe80::aaf7:e0ff:fe20:fd27.
The symbol '::' is a special syntax that can be used as a shorthand way of
representing multiple 16-bit groups of contiguous zeros; but it can only
appear once. It also uses the following legal IPv4 address. For example,
':192.1.2.34'.
Provide the IPv6 Prefix of this switch. The allowed range is 1 through 128.
Gateway Provide the IPv6 gateway address of this switch.
IPv6 address is in 128-bit records represented as eight fields of up to four
hexadecimal digits with a colon separating each field (:). For example,
fe80::aaf7:e0ff:fe20:fd27.
DHCPv6 Client To enable this Managed Switch to accept a configuration from a Dynamic
Host Configuration Protocol version 6 (DHCPv6) server. By default, the
Managed Switch does not perform DHCPv6 client actions. DHCPv6 clients
request the delegation of long-lived prefixes that they can push to individual
local hosts.
Buttons
• Click Apply to apply changes.
User configuration
This page provides an overview of the current users. Close and reopen the browser to
log in as another user on the web server. After setup is complete, click the
Apply
button and log in to the web interface with the new user name and password. The
following appears: