Interlogix NS3562-8P-2S, Руководство пользователя

Страница: 155 / 245

Chapter 4: Web configuration
NS3562-8P-2S User Manual 153
Telnet
The page includes the following fields:
Object Description
Telnet Service Disable or enable telnet service
Login Authentication List Select login authentication list from this drop-down menu.
Enable Authentication List Select enable authentication list from this drop-down menu.
Session Timeout Set the session timeout value.
Password Retry Count Set the password retry count value.
Silent Time Set the silent time value.
Buttons
• Click Apply to apply changes.
• Click Disconnect to disconnect Telnet communication.
• Click Delete to delete a login authentication list entry.
SSH
Configure SSH on the SSH Configuration page. This page shows the Port Security
status. Port Security is a module with no direct configuration. Configuration comes
indirectly from other user modules. When a user module has enabled port security on a
port, the port is set up for software-based learning. In this mode, frames from unknown
MAC addresses are passed on to the port security module, which in turn asks all user
modules whether to allow this new MAC address to forward or block it. For a MAC
address to be set in the forwarding state, all enabled user modules must unanimously
agree on allowing the MAC address to forward. If only one chooses to block it, it will be
blocked until that user module decides otherwise.