Interlogix NS3562-8P-2S Скачать руководство пользователя страница 46

Страница: 46 / 245

Chapter 4: Web configuration

NS3562-8P-2S User Manual

Level

Severity Name

Description

Debug

Debuggin messages

Informational

Informational messages only.

Notice

Normal but significant condition, such as cold start.

Warning

Warning conditions (e.g., return false, unexpected return)

Error

Error conditions (e.g., invalid input, default used)

Critical

Critical conditions (e.g., memory allocation, or free memory error -
resource exhausted)

Alert

Immediate action needed

Emergency

System unusable

Local log

The industrial managed switch local log information is provided here.

This page includes the following fields:

Object

Description

Logging Service

Enabled

: Enable logging service operation.

Disabled

: Disable logging service operation.

Buttons

• Click

Apply

to apply changes.

This page includes the following fields:

Object

Description

Target

The target of the local log entry. The following target types are supported:

Buffered

: Target the buffer of the local log.

File

: Target the file of the local log.

Содержание NS3562-8P-2S






















































































































































































































































Результаты поиска

Содержание NS3562-8P-2S

Отзывы:

Interlogix NS3562-8P-2S, Руководство пользователя, Страница: 46 / 245

Результаты поиска

Содержание NS3562-8P-2S

Отзывы: