Interlogix NS3562-8P-2S, Руководство пользователя

Страница: 171 / 245

Chapter 4: Web configuration
NS3562-8P-2S User Manual 169
The page includes the following fields:
Object Description
Port Select a port from the drop-down menu.
Status Enable or disable the IP source guard
Verify Source Configures the switch to filter inbound traffic-based IP addresses, or IP
addresses and MAC addresses.
None Disables IP source guard filtering on the switch.
IP Enables traffic filtering based on IP addresses stored in the binding table.
IP and MAC Enables traffic filtering based on IP addresses and the
corresponding MAC addresses stored in the binding table.
Max Binding Entry The maximum number of IP source guards that can be secured on this port
Buttons
• Click Apply to apply changes.
Binding table
The page includes the following fields:
Object Description
Port Select a port from the drop-down menu.
VLAN ID Indicates the ID of this particular VLAN.
MAC Address Sourcing MAC address is permitted.
IP Address Sourcing IP address is permitted.
• Click Add to add an IP source guard static binding table entry.
• Click Delete to delete an IP source guard static binding table entry.
Port security
This page allows you to configure the Port Security Limit Control system and port
settings. Limit Control permits limitation of the number of users on a given port. A user
is identified by a MAC address and VLAN ID. If Limit Control is enabled on a port, the
limit specifies the maximum number of users on the port. If this number is exceeded, an
action is taken.
The Limit Control module is one of the modules that utilize a lower-layer module while
the Port Security module manages MAC addresses learned on the port.
The Limit Control configuration consists of two sections: system- and a port-wide.