Interlogix NS3562-8P-2S, Руководство пользователя, Страница: 73 / 245

Chapter 4: Web configuration
NS3562-8P-2S User Manual 71
• All of the ports in a link aggregation have to be treated as a whole when moved
from/to, added or deleted from a VLAN.
• The Spanning Tree Protocol will treat all the ports in a link aggregation as a
whole.
• Enable the link aggregation prior to connecting any cable between the switches
to avoid creating a data loop.
• Disconnect all link aggregation port cables or disable the link aggregation ports
before removing a port link aggregation to avoid creating a data loop.
It allows a maximum of eight ports to be aggregated at the same time. The industrial
managed switch supports Gigabit Ethernet ports (up to eight groups). If the group is
defined as a LACP static link aggregationing group, then any extra ports selected are
placed in a standby mode for redundancy if one of the other ports fails. If the group is
defined as a local static link aggregationing group, then the number of ports must be
the same as the group member ports.
LAG setting
This page permits the configuration of load balance algorithm settings.
The page includes the following fields:
Object Description
Load Balance Algorithm MAC Address : The MAC address can be used to calculate the port
for the frame.
IP/MAC Address : The IP and MAC address can be used to calculate
the port for the frame.
Buttons
• Click Apply to apply changes.
LAG management
Configure LAG management on this page.