Interlogix NS3562-8P-2S Скачать руководство пользователя страница 69

Страница: 69 / 245

Chapter 4: Web configuration

NS3562-8P-2S User Manual

Port error disabled

This page displays port error disabled information. Ports can be disabled by some
protocols such as BPDU Guard, Loopback and UDLD.

The displayed counters are:

Object

Description

Port Name

Shows the error disabled port.

Error Disable Reason

Shows the reason why the port was disabled.

Time Left (Seconds)

Shows the time left for port disable.

Protected ports

When a switch port is configured to be a member of a protected group (also called a
private VLAN), communication between protected ports within that group can be
prevented. Two application examples are provided in this section:

• Customers connected to an ISP can be members of the protected group, but they

are not allowed to communicate with each other within that VLAN.

• Servers in a farm of web servers in a Demilitarized Zone (DMZ) are allowed to

communicate with the outside world and with database servers on the inside
segment, but are not allowed to communicate with each other.

Содержание NS3562-8P-2S






















































































































































































































































Результаты поиска

Содержание NS3562-8P-2S

Отзывы:

Interlogix NS3562-8P-2S, Руководство пользователя, Страница: 69 / 245

Результаты поиска

Содержание NS3562-8P-2S

Отзывы: