Chapter 4: Web configuration
70
NS3562-8P-2S User Manual
The Link Aggregation Control Protocol (LACP) provides a standardized means for
exchanging information between partner systems that require high speed redundant
links. Link aggregation permits grouping up to eight consecutive ports into a single
dedicated connection. This feature can expand bandwidth to a device on the network.
LACP operation requires full-duplex mode (refer to the IEEE 802.3ad standard for
further details).
Port link aggregations can be used to increase the bandwidth of a network connection
or to ensure fault recovery. Link aggregation permits grouping up to four consecutive
ports into a single dedicated connection between any two industrial managed switches
or other Layer 2 switches. However, before making any physical connections between
devices, use the link aggregation configuration menu to specify the link aggregation on
the devices at both ends. When using a port link aggregation, note that:
• The ports used in a link aggregation must all be of the same media type (RJ45, 100
Mbps fiber).
• The ports that can be assigned to the same link aggregation have certain other
restrictions (see below).
• Ports can only be assigned to one link aggregation.
• The ports at both ends of a connection must be configured as link aggregation
ports.
• None of the ports in a link aggregation can be configured as a mirror source port
or a mirror target port.
Содержание NS3562-8P-2S
Страница 1: ...NS3562 8P 2S User Manual P N 1073225 EN REV B ISS 01MAR19 ...
Страница 19: ...Chapter 2 Installation NS3562 8P 2S User Manual 17 Physical dimensions Dimensions W x D x H 178 x 25 x 134 mm ...
Страница 116: ...Chapter 4 Web configuration 114 NS3562 8P 2S User Manual Multicast service Multicast flooding ...