Interlogix FlexZone Series, Руководство по эксплуатации продукта

Страница: 29 / 104

Chapter 2: Installation
FlexZone™ Product Guide
23
Note: If the center conductor does not move back and forth easily (or at all)
during the flossing process, it is likely bound somewhere inside the cable. In this
case, repeat waving and tapping and flossing until the center conductor moves
freely and easily.
1. The second person begins by using pliers to apply 2.3 to 4.5 kg (5 to 10 lb) of
pulling tension to the center conductor while maintaining a firm grip on the
c
able’s black jacket (see Figure 18). The first person holds the cable firmly by
the black jacket and tells the second person to stop pulling when the knot
reaches the black jacket.
Figure 16: Tapping the sensor cable / Waving the sensor cable
Figure 17: Tapping the sensor cable / Waving the sensor cable
2. The first person then uses pliers to apply 2.3 to 4.5 kg (5 to 10 lb) of pulling
tension to the center conductor while maintaining a firm grip on the cable
’s
black jacket (see Figure 20). The second person holds the cable firmly by the
black jacket and tells the first person to stop pulling when the knot reaches
the black jacket.
Figure 18: Tapping the sensor cable / Waving the sensor cable
second person
first person
hold the cable and use pliers
to the center conductor
to apply pulling tension
hold the cable and tell the second person to stop
pulling when the knot reaches the black jacket
apply 2.3 to 4.5 kg (5 to 10 lb) pulling tension
to the center conductor
hold the cable
second person
first person
second person first person
hold the cable and use pliers to apply
hold the cable and tell the second person
pulling tension to the center conductor
to stop pulling when the knot reaches
the black jacket