Interlogix ATS1500A-IP-LP, Инструкция по установке и программированию

Страница: 95 / 376

Chapter 3: System functions
Advisor Advanced ATSx500A(-IP) Installation and Programming Manual 89
Type Description Available parameters
Part set 2 Part set 2 for areas [1][2] 1. Areas selection
2. User code requirement
Inhibit Inhibit zones [1][3] None
Test call Execute a test call [3][4] None
PC connection Establish connection with the
PC [1][3]
None
Service in Allow service in [5] None
Panic Activate panic alarm None
Chime area Change a chime functionality
status in the area
1. Areas selection
2. Status change: Clear, Set, or Toggle
Chime keypad Change a chime functionality
status on the keypad
1. Keypad selection
2. Status change: Clear, Set, or Toggle
Set without exit Immediate set (without exit
time) [1]
1. Areas selection
2. Area groups selection
3. User code requirement
Fire reset Reset fire detectors [1] 1. Areas selection
Show open zones Show open zones [1] 1. User code requirement
Active alarms Show zones in alarm state [1] 1. User code requirement
Active faults Show faulty zones [1] 1. User code requirement
Alarm memory Show acknowledged alarms [1] 1. User code requirement
Alarms to ACK Show unacknowledged alarms
[1]
None
UG control Change user group privileges 1. UG identifier
2 and further - user group privilege.
Choose a privilege, and then change it.
See “3.2.n.6 User group options” on page
169 for more details.
Note that the user group type must allow
this change. See “3.2.n.2 User group type”
on page 168 for details.
Keypad control Change keypad options 1. Keypad identifier
2. State change: lock or unlock
Walk test Run walk test [1] 1. Area selection
Output test Test outputs [1][4] 1. Output selection.
4 outputs can be assigned.
These outputs are switched on
simultaneously for the longest time period
configured in “8.1.2.1 Activation” on page
233.
2. User code requirement.