Intergraph Zx10 Ultra-Tower, Системное руководство

Страница: 23 / 100

11
If the system is connected to a network that uses the Transmission Control Protocol/Internet
Protocol (TCP/IP), get and record the appropriate TCP/IP information for your system from your
network administrator:
Internet Protocol (IP) address:
IP subnet mask:
IP domain name for your network:
IP address for your network’s default gateway:
IP addresses for Domain Name System (DNS)
servers, if any:
IP addresses for Windows Internet Name
Service (WINS) servers, if any:
The operating system delivery media contain software and drivers for both Reduced Instruction Set
Computing (RISC)- and Intel-based systems. When installing operating system software, make
sure you install it from the \
I
386 directory on the delivery media.
Going Through Setup
CAUTION If you start the system and then turn it off
before completing operating system Setup,
you will have to reinstall the operating
system and associated system software.
CAUTION Before starting the system for the first time,
you may want to learn more about system
power, startup, and shutdown. See Chapter
4, “Operating Notes,” for this information.
To start (apply full power to) the system for the first time,
press the Power button on the front of the base unit.
The first time you start the system, it boots to a Microsoft
End User License Agreement (EULA). After reading and
accepting the terms of the agreement, follow the
instructions to continue operating system Setup. Take the
default settings provided by Setup, except as noted in the
following text. You can set up a user account and join a
workgroup or domain after you configure the system.
Power Button