Intergraph Zx10 Ultra-Tower, Системное руководство

Страница: 54 / 100

42
Removing and Replacing Side Panels
WARNING The system is always on when connected to AC power. Before opening the
system, disconnect the system’s power cord from its AC power outlet.
WARNING Replace both side panels before operating the system. This ensures proper
airflow for cooling and reduces electromagnetic interference (EMI) emissions.
NOTE You can gain access to most internal components by removing the left side panel.
To remove a side panel:
1. Slide both lock clips on the side panel away from each other (
UNLOCK
).
2. Grasp the handhold on the panel, and pull the panel back and away from the chassis.
To replace a side panel:
1. Ensure both lock clips on the side panel are in the
UNLOCK
position.
2. Replace the panel onto the base unit, aligning the tabs on the inside of the panel with the
openings at the top and bottom of the chassis, and push the panel forward until it slides into
place against the faceplate.
3. Slide both lock clips toward each other (
LOCK
).
Lock Clips
(2 each side)
Left Side Panel
Handhold