Intergraph Zx10 Ultra-Tower, Системное руководство

Страница: 30 / 100

18
Configuring Peripheral Devices
If you install additional peripheral devices in the system, you will have to install and configure the
associated driver software. You may also have to install or configure any associated application
software to use the devices.
You can use the default backup tools provided with the operating system to run a tape drive. Go to
Backup on the Administrative Tools program menu. See the operating system documentation and
Help for more information.
See the documentation delivered with the peripheral devices for information on installing and
configuring driver software and associated application software. See the operating system
documentation and Help for information on using peripheral devices with the operating system.
Changing Drive Letters
If you have more than one hard disk drive or CD-ROM drive, you may need to reassign system
drive letters. See the operating system Help for more information.
To change drive letters:
1. Exit all applications currently running on your system.
2. Go to Disk Administrator in the Administrative Tools program menu.
3. Select a hard disk drive or the CD-ROM drive.
4. From the Tools menu, click Assign Drive Letter.
NOTE If you select the current drive or an otherwise locked drive, you must restart the
system to complete the drive letter reassignment.
5. Select a new drive letter to assign to the drive from the list. Click OK, and then click Yes to
continue.
6. If necessary, click OK, and then click Yes.
7. Repeat steps 2 through 6 for each drive letter assignment that you want to change.
8. Click Partition, then click Exit. If necessary, restart the system to complete the drive letter
reassignments.