Intergraph Zx10 Ultra-Tower, Системное руководство

Страница: 41 / 100

29
To use the CD-ROM drive:
♦
To insert a CD, press the eject button to extend the tray. Place the disc, printed side up, in the
tray and press the eject button again to retract the tray.
♦
To remove a CD, press the eject button, and remove the disc after the tray extends. Then
press the eject button again to retract the tray.
♦
The media player programs included with the operating system allow you to listen to audio
compact discs. Insert an audio CD, printed side up, into the drive and start the media player
application. Adjust the volume using the operating system’s sound control programs.
♦
Adjust the volume control on the drive for headphones connected to the drive.
Using System Management Software
Your system shipped with the following system management software installed:
♦
Hardware Monitor is an interface to instrumentation data measured by sensors inside the
computer. Event information is reported to the Event Log and displayed graphically.
♦
DMI Console gives easy access to the system’s status and configuration information. DMI
Console works with the Desktop Management Interface (DMI), a technology standard that
enables the effective management of computers.
♦
ECC Monitor monitors the system’s error correcting code (ECC) memory and reports any
problems.
♦
SMART Disk Driver (SMARTDRV) is a kernel-level driver that supports self-monitoring,
analysis, and reporting technology (SMART) for disk drives.
You can find these programs by going to Programs on the operating system’s Start menu. See the
online Help for each program for more information on how to use it.
Learning About the Operating System
Documentation delivered with your system describes the basic functions of its operating system.
Refer to this documentation if you are unfamiliar with the operating system interface and features.
You can also refer to extensive online Help; from the operating system Start menu, go to Help.