Intergraph Zx10 Ultra-Tower, Системное руководство

Страница: 86 / 100

74
Internal Peripheral Cabling
The following sections show EIDE and SCSI cable routings and connections to internal peripheral
devices, and depicts standard and optional cables used in the system. For detailed information and
location of bus connectors on the system board, see the System Board Manual.
CAUTION When handling cables, flex them as little as possible. Ensure that cables do not
contact sharp metal surfaces or become excessively bent or twisted. In particular,
SCSI cables should not have any creased bends.
EIDE Cabling
The installed EIDE cable connects the primary EIDE channel to the CD-ROM drive and to another
front-access peripheral device. Another EIDE cable, which can connect the secondary EIDE
channel to two front-access peripheral devices, is provided with the system but is not installed.
CD-ROM drive
Installed cable connects primary
EIDE channel to CD-ROM drive and
to one front-access EIDE device
Additional cable (provided but not
installed) connects secondary
EIDE channel to two front-access
EIDE devices