Intergraph TD-260 Скачать руководство пользователя страница 34 | Manualshive

Страница: 34 / 110

background image

20

Configuring a PC Card Adapter

If you purchased a PC Card adapter with your system, it was installed before shipment. To use
the PC Card adapter, you may have to install the driver software and any associated application
software programs.

Depending on your system’s configuration, you may have to reserve an interrupt request (IRQ)
for a PC Card device inserted in the PC Card adapter. See Chapter 11, “BIOS Setup,” for
information on reserving IRQs in your system’s BIOS. See the documentation delivered with
the PC Card adapter or device for detailed software installation and configuration instructions.

Configuring a Tape Drive

If you purchased an internal tape drive with your system, it was installed before shipment. On
a system running Windows 95 or Windows 98, you may have to install the driver software and
any associated applications software programs to use the tape drive. On a system running
Windows NT, you can use the Windows NT Backup tool to run the tape drive; select
Programs/Administrative Tools/Backup from the Start menu.

See the documentation delivered with the tape drive for configuration instructions. See the
device documentation, operating system documentation, and Help for information on using the
tape drive.

Configuring a Zip or Jaz Drive

If you purchased an internal Zip or Jaz drive with your system, it was installed before
shipment. To use the Zip or Jaz drive, you may have to install the driver software and any
associated applications software programs.

See the documentation delivered with the Zip or Jaz drive for configuration instructions. See
the device documentation, operating system documentation, and Help for information on using
the Zip or Jaz drive.

Configuring External SCSI Peripherals

The optional SCSI adapter is designed to support Fast SCSI-2 devices. If you connect
SCSI-1 devices to the adapter, data transfer rates are limited to the device’s speed.

CAUTION

Using a non-compliant SCSI-1 device with your system may cause your system to stop
working, or lead to other unpredictable results.

«
...
32
33
34
35
36
...
»

Содержание TD-260















































































































Отзывы:

Нет отзывов

Похожие инструкции для TD-260

Бренд: Radio Shack Страницы: 31

Бренд: Gateway Страницы: 72

CRM Point CRM-P

Бренд: Ubiquiti Страницы: 24

Бренд: PMC Страницы: 126

Бренд: Alera Страницы: 12

Бренд: Gigabyte Страницы: 2

Бренд: AZZA Страницы: 12

Бренд: NEC Страницы: 219

Бренд: Casio Страницы: 25

8872 - eServer xSeries 460

Бренд: IBM Страницы: 170

Бренд: Advanced Micro Computers Страницы: 86

Бренд: Asus Страницы: 2

Бренд: Asus Страницы: 8

Бренд: Asus Страницы: 2

ASUSTEK ROG Strix G15DK

Бренд: Asus Страницы: 41

Бренд: Asus Страницы: 16

Бренд: Asus Страницы: 44

Бренд: Asus Страницы: 55

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды