65
4.
Press the two locking tabs outward.
5.
Fasten the heat sink support bar until it clicks into place. See the previous figure.
6.
Connect the processor cooling fan power cable. See the previous figure.
CAUTION
Install the new processor with the cooling fan. Without a fan circulating air on the processor
and its heat sinks, the processor and/or the heat sinks can overheat and cause damage to both
the processor and the system board.
7.
Set the processor speed. If the CPU Plug and Play BIOS parameter is enabled, you can set
the processor speed in BIOS Setup. If the CPU Plug and Play BIOS parameter is disabled,
you must set jumpers and/or DIP switches to set the CPU speed.
Intel Celeron Processor
To remove the processor:
1.
Turn off power to the system.
2.
Open the system and, if necessary, remove the system board.
3.
Press the two locking tabs outward and lift the processor from the processor socket.
To replace the processor:
Insert the processor into the processor socket until it clicks into place.
