Intelligent Motion Systems MDrive AC Plus 34, Руководство по эксплуатации

Страница: 8 / 68

1-2
MDriveAC Plus Microstepping Hardware - Revision R052506
1-3
Part 1: Hardware Specifications
1. Insert the MDrive CD into the CD
Drive of your PC.
If not available, go to http:
//www.imshome.com/software_
interfaces.html.
2. The CD will auto-start.
3. Click the Software Button in the
top-right navigation Area.
4. Click the IMS SPI Interface link
appropriate to your operating
system.
5. Click SETUP in the Setup dialog
box and follow the on-screen
instructions.
6. Once IMS SPI Motor Interface
is installed, the MDriveAC Plus
Microstepping settings can be
checked and/or set.
Once installed you can change the motor run current, holding current, microstep resolution and other configura-
tion settings. By sending clock pulses to the drive you can now change these settings safely on the fly as the IMS
SPI Motor interface will not allow you to set an out of range value.
Figure GS.3: IMS Motor Interface Showing Default Settings
WARNING!
Because the
MDrive consists
of two core
components, a drive and
a motor, close attention
must be paid to the thermal
environment where the
device is used. See Thermal
Specifications.