25
In P10
，
select setting equipment: 0: door station
1:guard unit
2:perimeter gate station
Example enter 2, and LCD shows P17
1.Type:Perimete
2.No:0001
3.SwitchPort:00
4.Dist: 0
m
（
17
）
Then proceed with perimeter gate station and guard unit setting.
Then set perimeter gate station (guard unit) No., switch port No.
and distance, setting is just like door station setting, press[#] to
save when finish.
4.Download setting form
Press [back] key to back to P9, press[down] key to select
“download setting form”, press [confirm] key
，
after download,
LCD shows P18.
Successfully
0012 Bar
After successful download, back to P9
（
18
）
30
System Programming
■
Unit door station programming
First program first building
Step 1: Hardware setting
（
1
）
Set DIP of 4300 gate-way to 001 as below
（
2
）
Set the DIP digit for distributors
(
4110 & 4110S) in the unit respectively from 001-005
（
001
）
（
002
）
（
003
）
（
004
）
（
005
）
Step 2: Door station setting (first set on main door station)
1. Clear data
2. Door station No. setting, shows as below
3. Indoor phone information setting
（
1
）
Indoor phone number digit setting, show as below:
（
2
）
Input indoor phone information, here adopts matrix input mode (From 1
st
to 7
th
floor).
And the 8
th
floor should be set by single input, show as below:
Indoor phone:
801
Distributor: 005
Port No.: 1
Ring Type:
2
Start No.:
101
End No. :
702
Ring Type:
2
Password:
* * * *
2 bits
3 bits
4 bits
3 bits Current
Door station No.
0001
Gate-Way Port :
1