37
Enter System
Change PW
Help
Status
Under standby mode, press F1 key, to enter main menu of
function, showing as P1
System Password
：
_ _ _ _
In P1 select “Enter System”, press[#] to confirm, LCD shows P2,
enter system password here: 2-0-0-3
[Note] This code is initial password
，
users can revise the password.
System setting
If the password is correct, it will enter P3 automatically, here can
proceed system functions setting.
[Note] Use direction key[F1] or [F2] to select functions
，
press[*] to
back to P1.
Door Station
Indoor Phone
Alarm Setting
Card Setting
(1)
(2)
(3)
■
Data clearance
For first time setting, system data clearance is needed
1. Cancel all indoor phones No.
In P3, press [F2] to select “Indoor Phone”, press [#] to confirm,
enter P4, select “Clear Data”, press[#].
Single Input
Matrix Input
Clear Data
Bit
(4)
This door station has series of functions, and each function has its
own function form. To enter function form, please press F1 key,
press F1 or F2 key to roll and browse the function form, press [#]
key to confirm the function form you need. Use the same way
to choose sub-function form and setting. Press [*] key to back to
former function form or quit function form, if for 15 seconds, the
key is not used, it will quit from setting status automatically.
[F1]
：
Press this key to enter function form
direction key(up)
[F2]
：
Direction key (down)
[F3]:Direction key (left), public code unlocking key
[F4]:Direction key(right)
，
resident code unlocking
[1
～
9]
：
Number
[#]
：
confirm
[*]
：
quit
Clear Data
Press
*
return
Press # confirm
(5)
Clear Data
Successful.
(6)
Upload
Download
Clear Gate-way
Successful
(7)
LCD shows P5
，
according to hint
，
press[#]to cancel all indoor
phone No.
After successful clearance, a long sound of “di” can be heard
，
at
the same time LCD shows P6
，
press[*] to back to last menu P4.
[
] This function is used in the first time setting only.
2. Cancel gate-way data
In P4, press[F2] to select “Clear Gate-way”, press[#] to confirm,
after gate-way data clearance, LCD shows P7, press[*]to back to
P3.
[
] This function is used in the first time setting only.
18
(LED door station)
Step 2: Door station programming
1. Memory/Information clearance
(Only used in the first time programming)
2. Door station No. setting
In the menu of P2
, input
0
#
, enter the door station number
setting, it will show as P6 for the first time setting.
Input door station number, e.g.:
0
1
0
1
Input the gate-way port which connect to the door station, e.g.:
1
Press
#
button to confirm, it will automatically return to P2.
[Note] Door station’
s No. is from 0001, Port No. of gate-way please
refer to the port of gate-way connected t o door station.
(6)
On standby mode, press
F1
button
，
enter function main menu
as P1 shows.
Input the system password:
2
0
0
3
.
If the password is correct, automatically enter P2. It means enter
the setting state successfully.
(1)
(2)
In the setting state, input
1
#
, then input
2
#
to clear
all the indoor phone information. The LCD will shows as P3
during process.
(3)
(4)
If clearance successful, a long sound of “di” can be heard and
LCD shows as P4, press [*] button to back to menu of P2.
In the menu of P2, input
6
#
to clear the information in the
gate-way. After clearance, a long sound of “di” can be heard and
the LCD shows as P5, press [*] button to back to menu of P2.
(5)