39
3.Matrix input mode
[Note] This mode is only suitable for building with structure of matrix
，
if the
structure is different between floors, please choose single input mode.
In P10, choose “Matrix Input”, press [#] to confirm, LCD show
P15, input data according to hint.
◆
Start No.: Input start No. of indoor phone.
◆
End No.: Input last No. of indoor phone.
◆
Ring Type: Setting is the same as “Single Input”.
◆
Password: Input resident password
：
1234.
[Note] This code is initial code
，
users can revise it in function form
，
please refer to “Change PW”part.
Press * button to back to P10.
Start No.:_ _ _ _
End No. :_ _ _ _
Ring Type:_
Password:_ _ _ _
(15)
Start No.:0 1 0 4
End No. :2 0 0 4
Ring Type:2
Password:
* * * *
(16)
e.g.:
A building has 20 floors, each floor has 4 apartments. The
indoor phone start No. is 0101, end No. is 2004.
Distributor No. is from 001to 020.
The ring for door station calling indoor phone: ring 2.
Resident password: 1-2-3-4.
Setting as P16 shows, after input password, if there is no error,
P17 will show and back to P15, at this time another data can be
input, also can press [*] to back to P10.
4. Indoor phone data upload
[Note] This function is for upload indoor phone data saved in door
station to gate-way when in network.
In P10, press [F1] or [F2] to flip menu, choose “Upload”, shows
as P17, press[#]to confirm, and start to upload data, finally
screen shows the upload result which is P18 .
Press [*]to back to P17.
5. Indoor phone data download
[Note] This function is for download the indoor phone information
saved in gate-way to door station when in network.
In P17, choose “Download”, press[#]to confirm, LCD shows data
download status.
As P18 shows.
After data download completed, LCD shows P19, press[*]to back
to P16.
Upload
Download
Clear Data
Please wait…
Upload
Download
Clear Data
Successful
(19)
(20)
Seq. No.:080
Indoorphone.:2004
Distributor020-4
Ring Type:2
(18)
Upload
Download
Clear Gate-way
(17)
Alarm Setting
1+# Choose ON
0+# Choose OFF
Current OFF
(21)
■
Alarm setting
In P3 select “Alarm Setting”, press [#] to confirm, enter P21,
according the prompt to set the alarm ON/OFF.
[Note] Use direction key [F1] or [F2] to choose function, press [*]to
back to P3.
16
III. Matrix input mode
[Note] This mode is only suitable for buildings with matrix structure
，
if every floor has different quantity of apartment, then should
choose single input mode.
In P10, choose matrix input mode
，
press[#]to confirm
，
LCD
shows as P15,input data according to hint
◆
Start No.
：
Input the start indoor phone No.
◆
End No
：
Input the last indoor phone No.
◆
Ring Type
：
3 types of ring for user to choose
，
input ring No.
（
1~3
）
◆
Password
：
Input resident password
：
1-2-3-4
After finish, input press [*] to return to P10
Start No.: _ _ _ _
End No. : _ _ _ _
Ring Type:_
Password: _ _ _ _
（
15
）
Start No.:
0 1 0 1
End No. :
2 0 0 4
Ring Type:
2
Password:
* * * *
（
16
）
Successful
（
17
）
e.g.:
A building has 20 floors, each floor has 4 apartments. The
indoor phone start No. is 0101
，
end No. is 2004.
Distributor No. is from 001to 020
The ring for door station calling indoor phone
：
ring 2
Resident password
：
1-2-3-4
Setting as P16 shows, after input password, if there is no error,
P17 will show and back to P15 automatically
，
then you can input
another data, also you can press [*] to back to P10.
After finish, back to P12
，
input next indoor phone No. or press [*]
to back to P10.
[Note] 1. Ringing will be heard when indoor phone is called
2. When system’
s ring is chord melody type, there are 3 types
of rings for chosen. If the door station is with Dingdong ring
type
, then it is always “Dingdong”ring when choose 1-3.
Upload
Download
Clear Data
（
19
）
Seq. No.:080
Indoorphone.:2004
Distributor001-1
Ring Type:2
（
20
）
IV. Data upload
After indoor phone information set/program through door station,
all data is saved in door station, when connecting system to
network, these data need to be upload to gate-way