23
Network system programming
According to building programming steps, have all door stations programmed, and then proceed network system programming.
Step 1. Perimeter gate station setting
Step 2. Guard unit setting
Cleanup record
Done?
In P2
，
press [down] key to choose “Cleanup rec.”
，
press “confirm”
key , LCD shows P3
，
and press “confirm” key again
，
clear guard
unit data.
（
3
）
1.Data clearance
（
For first time programming
）
1. Add
2. Download
3. Cleanup
In P2
，
press[down] key to “Project Set”, press confirm
，
LCD
shows P4
（
4
）
In P4, press[down]key to choose “Cleanup”, press confirm key,
LCD shows P5
Done?
Press confirm key
，
LCD shows cleanup status
，
after finish, show
P6
，
then back to P4
（
5
）
Clean up
（
6
）
Press [confirm]key
，
LCD shows P1, input code: 1-2-3-4-5-6-7-8
[Note] This password is initial code
Input Password:
1.Guard No.
2.Project Set
3.Cleanup rec
4.Software VER
If password is right, will enter P2 directly
（
1
）
（
2
）
Enter System
Change PW
Help
On standby mode, press F1 to enter main menu of P1, choose
“Enter System” and press # to confirm.
System Password
：
_ _ _ _
LCD shows P2
，
enter system password
：
2-0-0-3
[Note] This password is the original one
If the password is correct, enter P3 automatically
，
choose
perimeter gate station No. and press # to confirm
Perimeter Gate
Card
Time & Date
PW Unlock
（
1
）
（
2
）
（
3
）
LCD shows P4
，
enter here the perimeter gate station No. and
switch port No., then press [*] to back to P3
[Note] The valid scope for perimeter gate station is 00
～
09.
Perimeter Gate:
— — — —
Switch Port:
—
（
4
）
e.g.:
Input the data according to left Picture and press # to
confirm, after successful registration, shows P5
Perimeter Gate:
0001
Switch Port:
1
（
5
）
32
4. After finishing setup form, download it to switch, when download finishes, will show below:
Step 3: Test basic functions
1. Perimeter gate station calling guard unit
Press # key on perimeter gate station to call guard unit, and guard unit answers.
2. Door station calling guard unit
Press # key on door station to call guard unit, guard unit answers
3. Intercom between indoor phone and guard unit.
Pick up indoor phone handset (if it is hands-free indoor phone, please press “talk” button), press “call” button to call guard unit,
guard unit answers; Pick up the handset of guard unit, dial room No. to call indoor phone, indoor phone answers.
4.
Perimeter gate station call indoor phone
Dial room No. on perimeter gate station (For example: Calling unit 001, room no. 301, you should dial “00010301”. Note: For the 3
digits door station, you should add 0 in the front to make the door station digits to be 4-digit.)
Successfully
0006 Bar