Intel UltraBookIIi, Руководство пользователя

Страница: 99 / 158

UltraBookIIi User Guide A–11
Hardw
ar
e
Input-Output Devices
Input-output devices are supported through device bays
and access panels. The UltraBookIIi has three device
bays and three access panels.
Device bays are cavities in the unit into which you can
install modular devices such as a hard disk drive or a
single lithium-ion battery. Two device bays are located
on the left side of the unit and are reserved for hard disk
drive modules. The third device bay is located on the
right side of the unit and is configured at the factory to
accept either a lithium-ion battery module or a hard
disk drive. Empty disk modules are available for empty
or unused device bays.
Access panels consist of ports, connectors, and switches
hidden behind three fold-down panel doors. Two access
panels are located along the right side of the unit. The
third access panel is located to the rear of the unit.
Audio devices are supported through a series of input
and output jacks located directly above the third device
bay.
The UltraBookIIi accepts the following removable
device modules:
•
Removable hard disk drives
• Lithium-ion battery module
Hard Disk Storage
The UltraBookIIi uses low-profile, high performance,
2.5-inch removable hard drive modules with an
integrated EIDE controller conforming to ATA-4 PIO
mode 4 and multi-word DMA modes 0, 1, and 2
specifications. These drives require a 5V input and
dissipate approximately 2 Watts of power.
Hard disk modules can be installed in either of the two
left-side device bays if the unit is not configured for the
Sun Creator 3D graphics options.