Intel UltraBookIIi, Руководство пользователя

Страница: 47 / 158

UltraBookIIi User Guide 3–19
Using
For a list of pin assignments for the UltraBookIIi
connector and I/O break-out cable, refer to
Appendix C.
The two serial ports are designated A and B on the
I/O break-out cable. When you connect serial devices
to the I/O break-out cable, make sure the device
intended for port A is plugged into the port A
connector and the device for port B is plugged into the
port B connector.
Using the Ultra/Fast-Wide SCSI Port
The UltraBookIIi back panel has an Ultra/Fast-Wide
SCSI port (see Figure 3-11). For more detailed
technical information on the SCSI port, refer to
Appendix A, Hardware, page A-19.
To access the SCSI port:
1. Shut down the UltraBookIIi according to
the instructions on page 3-10.
2. Turn off the SCSI device(s) you will be
connecting to it.
3. Connect the male end of the SCSI cable to
the UltraBookIIi’s SCSI connector on the
rear panel.
Figure 3-11 UltraBookIIi Rear Access port