Intel UltraBookIIi, Руководство пользователя

Страница: 37 / 158

UltraBookIIi User Guide 3–9
Using
A variety of system messages will be displayed on the
screen as Solaris continues to boot. After the last
system message, the screen will display the
“hostname console login” prompt.
If the UltraBookIIi does not respond when the power
switch is turned on, refer to Chapter 4 of this guide for
troubleshooting suggestions.
After powering-up the UltraBookIIi for the
first time, you are ready to configure your
workstation. Consult your system
administrator for details.
Restarting UltraBookIIi
Restarting an UltraBookIIi that has been halted and
powered down is a simple procedure.
To restart the UltraBookIIi:
1. Verify that cables from all connected pe-
ripheral devices, such as SCSI devices or
an external monitor, are connected to the
appropriate connectors on the back of the
UltraBookIIi.
2. Power-up the peripherals before power-
ing-up the UltraBookIIi (see the periph-
eral manuals for more information).
3. Turn on the UltraBookIIi.
The UltraBookIIi begins its self-test diagnostics
and starts to boot. It is normal for the screen to be
blank for up to 20 seconds before displaying the
following initial message:
hostname console login:
UltraBookIIi
ROM Rev.x.xx, Serial #xxxxxxx
xx MB memory installed, Keyboard Present
Ethernet address x:x:xx:x:x:xx, Host ID: xxxxxxxx