manualshive.com logo in svg

Intel Stratix 10, Руководство пользователя

Поделиться
Скачать
Intel Stratix 10 Скачать руководство пользователя страница 43

Parameter

Value

Description

RS-FEC block enabled, the RS-FEC lanes used must be

contiguous and must fit within a single four-channel RS-FEC

block.

Alignment/Scrambling/Transcoder

Mode

Basic Mode
Fibre-Channel

Mode

Basic Mode selects Ethernet-like mode for a specific lane. The

transcoder is not bypassed, alignment or codeword markers

are used for alignment of the RS-FEC block, and the PN-5280

scrambling is disabled.
Fibre-Channel Mode selects Fibre-Channel mode for RS-FEC

lanes. Fibre-channel mode disables RS-FEC alignment/

codeword markers. Selecting Fibre-Channel mode also

selects PN-5280 scrambling when in fractured mode.
CPRI Mode is identical to Fibre-Channel mode with respect to

the RS-FEC operation.

Transcoder Bypass Lane

Not Bypassed
Bypassed

Selects the transcoder mode for RS-FEC lanes.
• Not bypassed: The transcoder is not bypassed.
• Bypassed: Bypasses the transcoder to enable a user-

defined transcoder implemented in the FPGA.

Related Information
My Intel Support

2.2.6.1. Fibre-Channel and CPRI Modes

The core RS-FEC setup is identical for 32 GFC (Fibre-Channel) and CPRI. The RS-FEC

options appear in the GUI after you select the Enable RSFEC option. In these modes

alignment/codeword markers are not used, and PN-5280 scrambling and descrambling

are used.

The Number of data channels indicates how many data channels are RS-FEC-

enabled within one block. The First RSFEC Lane determines, which lane is the first

lane within one block. Together, these two parameters determine and fix the lanes you

are using in the IP core. For example, if Number of data channels is set to 3, the

only valid option for the first lane is 0 or 1. All the lanes must be contiguously placed

within one block, and you must observe this rule to achieve valid IP configurations.

Once you have correctly set those two parameters, the GUI indicates the channels

being enabled.

Figure 24.

Fibre-Channel Mode Settings

2. Implementing the Transceiver PHY Layer in Intel Stratix 10 Devices

UG-20056 | 2019.02.04

Send Feedback

Intel

®

 Stratix

®

 10 E-Tile Transceiver PHY User Guide

43

Содержание Stratix 10





































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды