manualshive.com logo in svg

Intel Stratix 10, Руководство пользователя

Поделиться
Скачать
Intel Stratix 10 Скачать руководство пользователя страница 107

6.5.2. Manual Reset Mode

In manual mode, all ports are exposed to provide flexible control. Follow the reset

sequence for RX and TX modes to send reset requests.

Note: 

The manual reset mode is required if fractured RS-FEC is used.

Table 47.

Native PHY IP Ports With Manual Mode Enabled

Port

Direction

Description

rx_reset_req

Input

Request to Master TRS to schedule RX reset

rx_reset_ack

Output

Valid window for you to assert/deassert

 rx_aib_reset

, 

rx_pmaif_reset

,

rx_rsfec_reset

rx_aib_reset

Input

Reset RX EMIB datapath

rx_pmaif_reset

Input

Reset RX PMA digital logic

rx_rsfec_reset

Input

Reset RX RS-FEC datapath

rx_transfer_ready

Output

Output from the Native PHY IP core indicating the RX EMIB datapath is ready

rx_pma_ready

Output

Output from the PMA indicating the PMA is ready. This must be asserted before

asserting or deasserting any RX resets.

rx_is_lockedtodata

Output

Output from the PMA indicating the CDR has locked to the incoming serial data

tx_reset_req

Input

Request to Master TRS to schedule TX reset

tx_reset_ack

Output

Valid window to assert or deassert 

tx_aib_reset

, 

tx_pmaif_reset

,

tx_rsfec_reset

, 

rsfec_reset

rsfec_reset

Input

Reset all RS-FEC logic

tx_aib_reset

Input

Reset TX EMIB datapath

tx_pmaif_reset

Input

Reset TX PMA digital logic

tx_rsfec_reset

Input

Reset TX RS-FEC datapath

tx_transfer_ready

Output

Output from the Native PHY IP core indicating the TX EMIB datapath is ready

tx_pma_ready

Output

Output from the PMA indicating the PMA is ready. This must be asserted before

asserting or deasserting any TX resets.

The 

reset

, 

rx_ready

, and 

tx_ready

 ports do not appear in manual reset mode.

6. Resetting Transceiver Channels

UG-20056 | 2019.02.04

Send Feedback

Intel

®

 Stratix

®

 10 E-Tile Transceiver PHY User Guide

107

Содержание Stratix 10





































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды