manualshive.com logo in svg

Intel Stratix 10, Руководство пользователя

Intel Stratix 10 - мощный FPGA для высокопроизводительных вычислений. Для ознакомления с функционалом устройства, загрузите бесплатное пособие по эксплуатации на manualshive.com. Пользовательский мануал содержит все необходимые данные для эффективного использования устройства в различных областях.

Поделиться
Скачать
background image

7.16.2. Alternative Method for Setting PMA Attributes

In addition to loading PMA attributes one by one, you can use registers 0x200 to

0x203 to load a set of common PMA attributes to all transceiver channels in the

instance. Please refer to Reading and Writing PMA Analog Parameters Using Attributes

for more details. Refer to Configuring a PMA Parameter Using Native PHY IP for an

example.

Related Information

•

Configuring a PMA Parameter Using Native PHY IP

 on page 157

•

Reading and Writing PMA Analog Parameters Using Attributes

 on page 182

7.17. Dynamic Reconfiguration Revision History

Document

Version

Changes

2019.02.04

Made the following changes:
• Added Loading IP Configuration Settings.
• Added Loading IP Configuration Settings Process.
• Added Alternative Method for Setting PMA Attributes.

2018.10.08

Made the following changes:
• Changed some descriptions in the "Dynamic Reconfiguration" section.
• Added a feature to the "Intel Stratix 10 Dynamic Reconfiguration Feature Support" table.
• Updated the reconfig_write waveform in the "Writing to the Reconfiguration Interface" figure.
• Switched the order of Disable PMA internal or serial loopback and Enable Initial RX Equalizer steps

in the "Dynamic Reconfiguration with Native PHY in Automatic Reset Mode" figure.

• Changed Step 4 in the "Embedded Reconfiguration Streamer" section.
• Added step 8f and 9 to Switching Reference Clocks.
• Added a reference to PMA Analog Reset from Switching Reference Clocks.

2018.07.18

Made the following changes:
• Added reconfiguring the PMA between NRZ and PAM4 (non high datarate) modes as a feature to the

"Dynamic Reconfiguration Feature Support" table.

• Added Multiple Reconfiguration Profiles.
• Updated Reconfiguration Files with entirely new information.
• Added Embedded Reconfiguration Streamer.
• Updated the steps in the Switching Reference Clocks section.

2018.05.15

Made the following changes:
• Removed "Configuration Files," "Multiple Dynamic Reconfiguration Profiles," "Changing Analog PMA

Settings," "Multiple Dynamic Reconfiguration Profiles," "Embedded Dynamic Reconfiguration

Streamer," "PMA Attribute Sequencer," and "Native PHY IP Core or Clocking Resources Guided

Reconfiguration Flow" sections.

• Added RX adaptation to the list of PMA analog features.
• Removed reconfig_rsfec pending support.
• Removed "PCS" from all sections.
• Updated MIF file format in the "Configuration Files" section.
• Updated the configuration file location in the "Multiple Reconfiguration Profiles" section.
• Removed the "Register read/write sequencer" block from the "Arbitration" figure and list of

programmable registers.

• Deleted data-rate-non-specific recommendation from the "Recommendations for Dynamic

Reconfiguration" section.

• Replaced the text in the "Steps to Perform Dynamic Reconfiguration" section with "Dynamic

Reconfiguration with Reset Controller in Automatic Mode" and "Dynamic Reconfiguration with Reset

Controller in Manual Mode (required for fractured RS-FEC mode)."

• Changed "Direct Reconfiguration Flow" with "PMA Register Read/Write Details."

continued...   

7. Dynamic Reconfiguration

UG-20056 | 2019.02.04

Intel

®

 Stratix

®

 10 E-Tile Transceiver PHY User Guide

Send Feedback

138

Содержание Stratix 10





































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для Stratix 10

Enterasys X-Pedition 2000 Getting Started Manual preview
X-Pedition 2000
Бренд: Enterasys Страницы: 86
Comway 4G DTU Configuration Instructions preview
4G DTU
Бренд: Comway Страницы: 20
NAMCO SOUL CALIBUR II Manual preview
SOUL CALIBUR II
Бренд: NAMCO Страницы: 26
NCR 7702-K134 Upgrade Manual preview
7702-K134
Бренд: NCR Страницы: 15
Xenteq SR 200-12 User Manual preview
SR 200-12
Бренд: Xenteq Страницы: 16
Maxtor DiamondMax 8S Specification Sheet preview
DiamondMax 8S
Бренд: Maxtor Страницы: 2
FOR-A USF-105PS Operation Manuals preview
USF-105PS
Бренд: FOR-A Страницы: 37
Vantec Aeroflow FX 120 VAF-1225 User Manual preview
Aeroflow FX 120 VAF-1225
Бренд: Vantec Страницы: 2
Digi NS7520B Series Hardware Reference Manual preview
NS7520B Series
Бренд: Digi Страницы: 339
Ecos SECURE BOOT STICK FX Administrator'S Manual preview
SECURE BOOT STICK FX
Бренд: Ecos Страницы: 22
KTI Networks KGS-2421 Installation Manual preview
KGS-2421
Бренд: KTI Networks Страницы: 25
Magma ExpressBox4 1U Quick Installation Manual preview
ExpressBox4 1U
Бренд: Magma Страницы: 2
ADTRAN JOBAID T200 IDSL Quick Start Manual preview
JOBAID T200 IDSL
Бренд: ADTRAN Страницы: 2
Cisco NM-1A-E3 User Manual preview
NM-1A-E3
Бренд: Cisco Страницы: 26
Cisco Linksys WET610N Quick Installation Manual preview
Linksys WET610N
Бренд: Cisco Страницы: 78
Cisco MX60 Manual preview
MX60
Бренд: Cisco Страницы: 8
Cisco NCS 1000 Installation Manual preview
NCS 1000
Бренд: Cisco Страницы: 14
Cisco OL-7822-06 Quick Start Manual preview
OL-7822-06
Бренд: Cisco Страницы: 64

Бренды по названию

Популярные бренды

Загрузить еще бренды