Panel PC USER’S MANUAL
Intel Platform, High Performance PPC
44
4.5.2.13 Typematic Delay (Msec)
When the typematic rate is enabled, this item allows you to set the time interval for
displaying the first and second characters. By default, this item is set to 250msec.
4.5.2.14 Security Option
This field allows you to limit access to the System and Setup. The default value is
Setup. When you select System, the system prompts for the User Password every
time you boot up. When you select Setup, the system always boots up and prompts
for the Supervisor Password only when the Setup utility is called up.
4.5.2.15 APIC Mode
APIC stands for Advanced Programmable Interrupt Controller. The default setting is
Enabled.
4.5.2.16 MPS Version Control for OS
This option is specifies the MPS (Multiprocessor Specification) version for your
operating system. MPS version 1.4 added extended configuration tables to improve
support for multiple PCI bus configurations and improve future expandability. The
default setting is 1.4.
4.5.2.17 OS Select for DRAM > 64MB
This option allows the system to access greater than 64MB of DRAM memory when
used with OS/2 that depends on certain BIOS calls to access memory. The default
setting is Non-OS/2.
4.5.2.18 Report No FDD For WIN 95
If you are using Windows 95/98 without a floppy disk drive, select Enabled to
release IRQ6. This is required to pass Windows 95/98's SCT test. You should also
disable the Onboard FDC Controller in the Integrated Peripherals screen when
there's no floppy drive in the system. If you set this feature to Disabled, the BIOS
will not report the missing floppy drive to Win95/98.
4.5.2.19 Small Logo (EPA) Show
The EPA logo appears at the right side of the monitor screen when the system is
boot up. The default setting is Enabled.
