Intel® Server Board M50CYP2SB Family Technical Product Specification
147
5.
Ensure that the ejection tabs at both ends of the memory slot are pushed outward to the open
position (see Letter A).
6.
Carefully unpack the replacement memory module, taking care to only handle the device by its outer
edges.
7.
Align the notch at the bottom edge of the memory module with the key in the memory slot
(see Letter B).
8.
Insert the memory module into the memory slot.
•
Using even pressure along the top edge, push down on the memory module (see Letter C) until
the ejection tabs of the memory slot snap into place (see Letter D).
9.
Ensure that the ejection tabs are firmly in place (see Letter E).
Note:
Replacing Intel® Optan
e™ PMem devices requires additional steps to enable and configure them. Refer
to the appropriate Intel® Optane™ PMem documentation to complete the installation process for these
devices.
Содержание M50CYP2SB Series
Страница 2: ...2 This page intentionally left blank...
