Intel® Server Board M50CYP2SB Family Technical Product Specification
135
•
Wear ESD protective gear like a grounded antistatic wrist strap, sole grounders, and/or conductive
shoes
•
Wear an anti-static smock or gown to cover any clothing that may generate an electrostatic charge
•
Remove all jewelry
•
Disconnect all power cables and cords attached to the server before performing any integration or
service
•
Touch any unpainted metal surface of the chassis before performing any integration or service
•
Hold all circuit boards and other electronic components by their edges only
•
After removing electronic devices from the system or from their protective packaging, place them
component side up on to a grounded anti-static surface or conductive workbench pad. Do not place
electronic devices on to the outside of any protective packaging.
H.1 Server Board Installation Guidelines
This section provides general guidelines and recommendations for installing the server board into a server
chassis. However, Intel highly recommends that system integrators follow all installation guidelines and
instructions provided by the chassis manufacturer when integrating the server board into the chosen chassis.
In the following figure, the red circles represent the mounting hole locations.
Figure 66. Server Board Mounting Hole Locations
Содержание M50CYP2SB Series
Страница 2: ...2 This page intentionally left blank...