manualshive.com logo in svg

Intel ITANIUM ARCHITECTURE, Руководство пользователя

Поделиться
Скачать
Intel ITANIUM ARCHITECTURE Скачать руководство пользователя страница 293

4:286

Volume 4: Base IA-32 Instruction Reference

MOV—Move

 (Continued)

SS 



segment selector;

SS 



segment descriptor;

FI;

FI;
IF DS, ES, FS or GS is loaded with non-null selector;
THEN

IF segment selector index is outside descriptor table limits

OR segment is not a data or readable code segment
OR ((segment is a data or nonconforming code segment)

AND (both RPL and CPL 



DPL))

THEN #GP(selector);

IF segment not marked present

THEN #NP(selector);

ELSE

SegmentRegister 



segment selector;

SegmentRegister 



segment descriptor;

FI;

FI;
IF DS, ES, FS or GS is loaded with a null selector;

THEN

SegmentRegister 



null segment selector;

SegmentRegister 



null segment descriptor;

FI;

Flags Affected

None.

Additional Itanium System Environment Exceptions

IA-32_Intercept

System Flag Intercept trap for Move to SS

Itanium Reg Faults  NaT Register Consumption Abort.
Itanium Mem FaultsVHPT Data Fault, Nested TLB Fault, Data TLB Fault, Alternate Data 

TLB Fault, Data Page Not Present Fault, Data NaT Page Consumption 

Abort, Data Key Miss Fault, Data Key Permission Fault, Data Access 

Rights Fault, Data Access Bit Fault, Data Dirty Bit Fault

Protected Mode Exceptions

#GP(0)

If attempt is made to load SS register with null segment selector.
If the destination operand is in a nonwritable segment.
If a memory operand effective address is outside the CS, DS, ES, FS, 

or GS segment limit.
If the DS, ES, FS, or GS register contains a null segment selector.

#GP(selector)

If segment selector index is outside descriptor table limits. 
If the SS register is being loaded and the segment selector's RPL and 

the segment descriptor’s DPL are not equal to the CPL. 
If the SS register is being loaded and the segment pointed to is a 

nonwritable data segment.
If the DS, ES, FS, or GS register is being loaded and the segment 

pointed to is not a data or readable code segment.

Содержание ITANIUM ARCHITECTURE





























































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды