manualshive.com logo in svg

Intel ITANIUM ARCHITECTURE, Руководство пользователя

Поделиться
Скачать
Intel ITANIUM ARCHITECTURE Скачать руководство пользователя страница 263

4:256

Volume 4: Base IA-32 Instruction Reference

LDS/LES/LFS/LGS/LSS—Load Far Pointer 

(Continued)

SS 

 SegmentDescriptor([SRC]);

ELSE IF DS, ES, FS, or GS is loaded with non-null segment selector

THEN IF Segment selector index is not within descriptor table limits
OR Access rights indicate segment neither data nor readable code segment
OR (Segment is data or nonconforming-code segment 

AND both RPL and CPL > DPL)
THEN #GP(selector);

FI;
ELSE IF Segment marked not present

THEN #NP(selector);

FI;
SegmentRegister 

 SegmentSelector(SRC) AND RPL;

SegmentRegister 

 SegmentDescriptor([SRC]);

ELSE IF DS, ES, FS or GS is loaded with a null selector:

SegmentRegister 

 NullSelector;

SegmentRegister(DescriptorValidBit) 

 0; (*hidden flag; not accessible by software*)

FI;

FI;
IF (Real-Address or Virtual 8086 Mode)

THEN

SS 

 SegmentSelector(SRC);

FI;
DEST 

 Offset(SRC);

Flags Affected

None.

Additional Itanium System Environment Exceptions

Itanium Reg Faults  NaT Register Consumption Abort.
Itanium Mem FaultsVHPT Data Fault, Nested TLB Fault, Data TLB Fault, Alternate Data 

TLB Fault, Data Page Not Present Fault, Data NaT Page Consumption 

Abort, Data Key Miss Fault, Data Key Permission Fault, Data Access 

Rights Fault, Data Access Bit Fault, Data Dirty Bit Fault

Protected Mode Exceptions

#UD

If source operand is not a memory location.

#GP(0)

If a null selector is loaded into the SS register.
If a memory operand effective address is outside the CS, DS, ES, FS, 

or GS segment limit.
If the DS, ES, FS, or GS register is used to access memory and it 

contains a null segment selector.

#GP(selector)

If the SS register is being loaded and any of the following is true: 

the segment selector index is not within the descriptor table limits, 

the segment selector RPL is not equal to CPL, the segment is a 

nonwritable data segment, or DPL is not equal to CPL.

Содержание ITANIUM ARCHITECTURE





























































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды