manualshive.com logo in svg

Intel ITANIUM ARCHITECTURE, Руководство пользователя, Страница: 292 / 604

Поделиться
Скачать
Intel ITANIUM ARCHITECTURE Скачать руководство пользователя страница 292

Volume 4: Base IA-32 Instruction Reference

4:285

MOV—Move

 (Continued)

If the destination operand is a segment register (DS, ES, FS, GS, or SS), the source 
operand must be a valid segment selector. In protected mode, moving a segment 
selector into a segment register automatically causes the segment descriptor 
information associated with that segment selector to be loaded into the hidden 
(shadow) part of the segment register. While loading this information, the segment 
selector and segment descriptor information is validated (see the “Operation” algorithm 
below). The segment descriptor data is obtained from the GDT or LDT entry for the 
specified segment selector. 

A null segment selector (values 0000-0003) can be loaded into the DS, ES, FS, and GS 
registers without causing a protection exception. However, any subsequent attempt to 
reference a segment whose corresponding segment register is loaded with a null value 
causes a general protection exception (#GP) and no memory reference occurs.

Loading the SS register with a MOV instruction inhibits all external interrupts 
and traps until after the execution of the next instruction in the IA-32 System 
Environment. For the Itanium System Environment, MOV to SS results in a 
IA-32_Intercept(SystemFlag) trap after the instruction completes. 

This 

operation allows a stack pointer to be loaded into the ESP register with the next 
instruction (MOV ESP, 

stack-pointer value

) before an interrupt occurs. The LSS 

instruction offers a more efficient method of loading the SS and ESP registers.

When moving data in 32-bit mode between a segment register and a 32-bit 
general-purpose register, the Pentium Pro processor does not require the use of a 
16-bit operand size prefix; however, some assemblers do require this prefix. The 
processor assumes that the sixteen least-significant bits of the general-purpose register 
are the destination or source operand. When moving a value from a segment selector 
to a 32-bit register, the processor fills the two high-order bytes of the register with 
zeros.

Operation

DEST 



SRC;

Loading a segment register while in protected mode results in special checks and 
actions, as described in the following listing. These checks are performed on the 
segment selector and the segment descriptor it points to.

IF SS is loaded;

THEN

IF segment selector is null 

THEN #GP(0);

FI;
IF segment selector index is outside descriptor table limits 

OR segment selector's RPL 

 CPL 

OR segment is not a writable data segment

OR DPL 

 CPL

THEN #GP(selector);

FI;
IF segment not marked present 

THEN #SS(selector);

ELSE

Содержание ITANIUM ARCHITECTURE





























































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов