manualshive.com logo in svg

Intel ITANIUM ARCHITECTURE, Руководство пользователя

Поделиться
Скачать
Intel ITANIUM ARCHITECTURE Скачать руководство пользователя страница 285

4:278

Volume 4: Base IA-32 Instruction Reference

LSL—Load Segment Limit

Description

Loads the unscrambled segment limit from the segment descriptor specified with the 
second operand (source operand) into the first operand (destination operand) and sets 
the ZF flag in the EFLAGS register. The source operand (which can be a register or a 
memory location) contains the segment selector for the segment descriptor being 
accessed. The destination operand is a general-purpose register.

The processor performs access checks as part of the loading process. Once loaded in 
the destination register, software can compare the segment limit with the offset of a 
pointer. 

The segment limit is a 20-bit value contained in bytes 0 and 1 and in the first 4 bits of 
byte 6 of the segment descriptor. If the descriptor has a byte granular segment limit 
(the granularity flag is set to 0), the destination operand is loaded with a byte granular 
value (byte limit). If the descriptor has a page granular segment limit (the granularity 
flag is set to 1), the LSL instruction will translate the page granular limit (page limit) 
into a byte limit before loading it into the destination operand. The translation is 
performed by shifting the 20-bit “raw” limit left 12 bits and filling the low-order 12 bits 
with 1s.

When the operand size is 32 bits, the 32-bit byte limit is stored in the destination 
operand. When the operand size is 16 bits, a valid 32-bit limit is computed; however, 
the upper 16 bits are truncated and only the low-order 16 bits are loaded into the 
destination operand.

This instruction performs the following checks before it loads the segment limit into the 
destination register: 

• Checks that the segment selector is not null.
• Checks that the segment selector points to a descriptor that is within the limits of 

the GDT or LDT being accessed.

• Checks that the descriptor type is valid for this instruction. All code and data 

segment descriptors are valid for (can be accessed with) the LSL instruction. The 
valid special segment and gate descriptor types are given in the following table. 

• If the segment is not a conforming code segment, the instruction checks that the 

specified segment descriptor is visible at the CPL (that is, if the CPL and the RPL of 
the segment selector are less than or equal to the DPL of the segment selector).

If the segment descriptor cannot be accessed or is an invalid type for the instruction, 
the ZF flag is cleared and no value is loaded in the destination operand.

Opcode

Instruction

Description

0F 03 /

r

LSL 

r16,r/m16

Load:

 r16 

 segment limit, selector

 r/m16

0F 03 /

r

LSL

 r32,r/m32

Load: 

r32 

 

segment limit, selector 

r/m32

)

Содержание ITANIUM ARCHITECTURE





























































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды