Intel BX80570E8200 - Core 2 Duo 2.66 GHz Processor Скачать руководство пользователя страница 65 | Manualshive

Страница: 65 / 128

background image

Intel® Quiet System Technology (Intel® QST)

Thermal and Mechanical Design Guidelines

65

7

Intel

®

Quiet System

Technology (Intel

®

QST)

In the Intel 965 Express Family Chipset a new control algorithm for fan speed control

is being introduced. It is composed of an Intel Management Engine (ME) in the

Graphics Memory Controller Hub (GMCH) which executes the Intel Quiet System

Technology (Intel QST) algorithm and the ICH8 containing the sensor bus and fan

control circuits.

The ME provides integrated fan speed control in lieu of the mechanisms available in a

SIO or a stand-alone ASIC. The Intel QST is time based as compared to the linear or

state control used by the current generation of FSC devices.

A short discussion of Intel QST will follow along with thermal solution design

recommendations. For a complete discussion of programming the Intel QST in the ME

Consult the

Intel

®

Quiet System Technology (Intel

®

QST) Configuration and Tuning

Manua

l.

Note:

Fan speed control algorithms and Intel QST in particular rely on a thermal solution
being compliant to the processor thermal profile. It is unlikely that any fan speed
control algorithm can compensate for a non-compliant thermal solution. See Chapter

and Chapter

6 for thermal solution requirements that should be met before evaluating

or configuring a system with Intel QST.

7.1

Intel

®

QST Algorithm

The objective of Intel QST is to minimize the system acoustics by more closely

controlling the thermal sensors to the corresponding processor or chipset device

T

CONTROL

value. This is achieved by the use of a Proportional-Integral-Derivative (PID)

control algorithm and a Fan Output Weighting Matrix. The PID algorithm takes into

account the difference between the current temperature and the target (T

CONTROL

), the

rate of change and direction of change to minimize the required fan speed change.

The Fan Output Weighting Matrix uses the effects of each fan on a thermal sensor to

minimize the required fan speed changes

7-1 shows in a very simple manner how Intel QST works. See the

Intel Quiet

System Technology (Intel

®

QST) Configuration and Tuning Manua

l for a detail

discussion of the inputs and response.

«
...
63
64
65
66
67
...
»

Содержание BX80570E8200 - Core 2 Duo 2.66 GHz Processor

































































































































Отзывы:

Нет отзывов

Похожие инструкции для BX80570E8200 - Core 2 Duo 2.66 GHz Processor

Бренд: GE Страницы: 93

WS-650 lite Series

Бренд: Laurell Страницы: 84

ILDA Gem Laser projector tool

Бренд: Stanwax Laser Страницы: 3

Бренд: ADS Technologies Страницы: 1

DEEP LEARNING PLUS

Бренд: Concept Pro Страницы: 28

Бренд: Lindy Страницы: 12

Бренд: sound4 Страницы: 66

Бренд: MCT Страницы: 12

Бренд: Kordis Страницы: 31

Бренд: Abus Страницы: 98

Бренд: Renesas Страницы: 6

Бренд: StetSom Страницы: 18

Бренд: Intel Страницы: 469

Бренд: ADTRAN Страницы: 4

Firebox T85-PoE

Бренд: Watchguard Страницы: 27

Бренд: Olivella Modular Страницы: 19

Бренд: Fujitsu Страницы: 14

Бренд: SunFounder Страницы: 527

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды