Intel BX80570E8200 - Core 2 Duo 2.66 GHz Processor Скачать руководство пользователя страница 48

Страница: 48 / 128

Balanced Technology Extended (BTX) Thermal/Mechanical Design Information

Thermal and Mechanical Design Guidelines

5.2.3

Recommended BIOS/CPU/Memory Test Procedures

This test is to ensure proper operation of the product before and after environmental

stresses, with the thermal mechanical enabling components assembled. The test shall

be conducted on a fully operational motherboard that has not been exposed to any

battery of tests prior to the test being considered.

Testing setup should include the following components, properly assembled and/or

connected:



Appropriate system motherboard



Processor



All enabling components, including socket and thermal solution parts



Power supply



Disk drive



Video card



DIMM



Keyboard



Monitor

The pass criterion is that the system under test shall successfully complete the

checking of BIOS, basic processor functions and memory, without any errors.

5.3

Material and Recycling Requirements

Material shall be resistant to fungal growth. Examples of non-resistant materials

include cellulose materials, animal and vegetable based adhesives, grease, oils, and

many hydrocarbons. Synthetic materials such as PVC formulations, certain

polyurethane compositions (e.g., polyester and some polyethers), plastics which

contain organic fillers of laminating materials, paints, and varnishes also are

susceptible to fungal growth. If materials are not fungal growth resistant, then MIL-

STD-810E, Method 508.4 must be performed to determine material performance.

Material used shall not have deformation or degradation in a temperature life test.

Any plastic component exceeding 25 grams must be recyclable per the European Blue

Angel recycling standards.

Содержание BX80570E8200 - Core 2 Duo 2.66 GHz Processor

































































































































Результаты поиска

Содержание BX80570E8200 - Core 2 Duo 2.66 GHz Processor

Отзывы:

Похожие инструкции для BX80570E8200 - Core 2 Duo 2.66 GHz Processor

Бренды по названию

Популярные бренды

Intel BX80570E8200 - Core 2 Duo 2.66 GHz Processor, Руководство по конструкции

Результаты поиска

Содержание BX80570E8200 - Core 2 Duo 2.66 GHz Processor

Отзывы:

Похожие инструкции для BX80570E8200 - Core 2 Duo 2.66 GHz Processor

Бренды по названию

Популярные бренды