Intel BX80570E8200 - Core 2 Duo 2.66 GHz Processor Скачать руководство пользователя страница 41

Страница: 41 / 128

Balanced Technology Extended (BTX) Thermal/Mechanical Design Information

Thermal and Mechanical Design Guidelines

Balanced Technology Extended
(BTX) Thermal/Mechanical
Design Information

5.1

Overview of the BTX Reference Design

The reference thermal module assembly is a Type II BTX compliant design and is

compliant with the reference BTX motherboard keep-out and height recommendations
defined in Section

6.6.

The solution comes as an integrated assembly. An isometric view of the assembly is
provided in Figure

5-4.

5.1.1

Target Heatsink Performance

Table

5–1 provides the target heatsink performance for the processor with the BTX

boundary conditions. The results will be evaluated using the test procedure described
in Section

5.2.

The table also includes a T

assumption of 35.5° C for the Intel reference thermal

solution at the processor fan heatsink inlet discussed in section

3.3. The analysis

assumes a uniform 35° C external ambient temperature to the chassis of across the

fan inlet, resulting in a temperature rise, T

, of 0.5° C. Meeting T

and



targets can

maximize processor performance (refer to Sections

2.2,

2.4. and Chapter

4).

Minimizing T

, can lead to improved acoustics.

Table

5–1. Balanced Technology Extended (BTX) Type II Reference TMA Performance

Processor

Thermal

Requirements,



(Mean + 3



)

Assumption

Notes

Intel Core™2 Duo Processor E8000
series with 6 MB cache

0.57



C/W 35.5



C 1,2,3

Intel Core™2 Duo processor E7000
series with 3 MB cache /Intel Pentium

dual-core processor

E6000,

E5000 series

with 2 MB cache /

Intel

Celeron

processor E3x00 series with 1 MB cache

0.594



C/W 35.5



C 1,2,3

NOTES:

Performance targets (

ca) as measured with a live processor at TDP.

The difference in

ca between the Intel Core™2 Duo processor E8000 series with

6 MB cache, Intel Core™2 Duo processor E7000 series with 3 MB cache, Intel Pentium

dual-core processor E6000, E5000 series with 2 MB cache, and Intel

Celeron

processor E3x00 series is due to a slight difference in the die size.

This data is pre-silicon data, and subject to change with the post silicon validate results

Содержание BX80570E8200 - Core 2 Duo 2.66 GHz Processor

































































































































Результаты поиска

Содержание BX80570E8200 - Core 2 Duo 2.66 GHz Processor

Отзывы:

Похожие инструкции для BX80570E8200 - Core 2 Duo 2.66 GHz Processor

Бренды по названию

Популярные бренды

Intel BX80570E8200 - Core 2 Duo 2.66 GHz Processor, Руководство по конструкции

Результаты поиска

Содержание BX80570E8200 - Core 2 Duo 2.66 GHz Processor

Отзывы:

Похожие инструкции для BX80570E8200 - Core 2 Duo 2.66 GHz Processor

Бренды по названию

Популярные бренды