Instantel Minimate Pro Series, Руководство оператора

Страница: 64 / 124

9
–6
Minimate Pro Operator Manual
Use the Waveform Record Mode in conjunction with the Monitor Scheduler feature to
record in the future, Once, Daily , Weekly , repeated as required, or set it to Off and
record continuously based on the Trigger Level – the monitor records all Events whose
activity exceeds the preset Trigger Level for the ISEE/DIN Geophone(s) and/or Linear
Microphone.
(1)1. To select the Waveform Record Mode:
1. Within the Edit Current Setup menu, press the Up or Down key to locate and
highlight the Record Mode menu option.
2. Press the Right Arrow key to access the menu. Continue to press the Right
Arrow key until the Record Mode displays Waveform . The following menu
will be displayed:
3.
Press the Enter key to Save the new Record Mode setting.
4. Press the Enter key to Save the new Current Setup by overwriting the name
displayed, or by creating a new Setup File name.
5. Press the Cancel key to return to the Ready to Monitor display.
(1)2. Dynamic Recording Information – Waveform Record Mode
Viewing the Dynamic Recording Information displayed during the recording
of a Waveform Event:
1. Once the Record Mode has been selected and the Event recording begins, the
unit will briefly display the following message:
2. The unit will then enter Waveform Record Mode and began monitoring for
Events:
NOTE: A message, Sensor Check , will appear if it has been activated in the
Preferences menu. Refer to Sensor Check under the View/Edit Preferences
Section of this manual to learn more about the feature and to determine when it
will be activated. The
Sensor Check setting will determine when it will notify
that it is occurring, Before Monitoring or After Event , or not at all if it is
Disabled .