Instantel Minimate Pro Series, Руководство оператора

Страница: 99 / 124

Minimate Pro Operator Manual
9
–41
a. About
The About command opens a new screen that displays the following information:
Model and Serial Number
Firmware Release Number and Date
Calibration Date
Free Memory
Battery Percent
(1)
Press the Right Arrow key to select the About command
(2) Press the Cancel key to return to the Maintenance menu.
b. View Channel Data
The View Channel Data menu is a diagnostic tool that an Instantel Technical Services
Representative may ask you to describe the information shown.
(1)
Press the Down Arrow key to scroll and highlight the View Channel Data
menu option.
(2) Press the Right Arrow key to enter the View Channel Data display menu.
(3)
After a few seconds, the data will appear for Channels 1-3.
(4) If you are using a Minimate Pro6 unit, you can press the Enter key to access
the Channel 4-6 data. This includes channel Value , Minimum , Maximum ,
Average , and Maximum Difference .
(5)
Press the Cancel key to exit the previous menu.
c. View Battery Data
The View Battery Data menu is a diagnostic tool that an Instantel Technical Services
Representative may ask you to describe the information shown.
(1)
Press the Down Arrow key to scroll and highlight the View Battery Data menu
option.
(2) Press the Right Arrow key to enter the View Battery Data display menu.
(3)
Battery data for Voltage , Percent Charged , Temperature , and Current is
displayed.
(4) Press the Cancel key to exit the previous menu.
d. View Ethernet Data
The View Ethernet Data provides information about the Ethernet settings, including the
Mac Address , the status ( Automatic or Static ), and the assigned IP Address . If the
unit is successfully communicating with a network connection, the Mac Address and IP
Address will indicate Enabled and Up .
(1)
Press the Down Arrow key to scroll and highlight the View Ethernet Data
menu option.
(2)
Press the Right Arrow key to enter the View Ethernet Data display menu.
(3) Press the Cancel key to exit the previous menu.
e. Self Check
Select the Self Check mode for where you require a record indicating the monitor was
operating properly. An Instantel Service Technician may ask you to perform this Self
Check . This is a diagnostic tool that displays the status of various hardware and software
components. The results of the Self Check are displayed on four screens on the unit and
any items that are tested that don‟t pass, are listed in the Monitor Log as Failed . The