Minimate Pro Operator Manual
9
–37
1.
Press the
Down Arrow
key to highlight
Call Home Session Timeout
.
2.
Press the
Right Arrow
key to enter the editing mode.
3.
Press the
Right
and
Left
Arrow
keys, as required, to place the cursor under the desired
value.
4.
Press the
Up
or
Down
Arrow
keys to edit each field.
5.
Press the
Enter
key to save the new setting.
NOTE:
Make sure that the timeout is long enough to allow an Event to download before
the connection is terminated. For example, a 1- second 4-channel Event recorded at 1024
sps takes about 1 minute to transfer using a typical modem connection.
h. Date and Time:
There are several ways to set the unit
Date and Time
. Either enter the
Date
and
Time
directly on the unit within the
View/Edit Preferences
menu, or by attaching the unit to
the PC and using the
Blastware
program to send a set
Date/Time
or synchronizing with
the PCs date and time.
The clock on the unit
does not
automatically adjust for Daylight
Savings – ensure that you update the clock on these dates so that the correct time is
displayed on the
Event Reports
.
Follow the directions below to set the time and date by using the Blastware program:
1.
Attach the
Minimate Pro
communications cable between your PC and unit.
2.
Start the
Blastware
program; ensure that the baud rate of the
Minimate Pro
and
the
Blastware
communications are identical.
3.
From the
Unit
menu, select
Date/Time.
4.
Within the
Date/Time
menu, there are two sections, a)
PC Date/Time
, and
b)
Unit
Date/Time
5.
Select the
Send to Unit
button to synchronize the unit to the PC
Date/Time
, or
6.
Enter
the
Date/Time
within the fields under the
Unit Date/Time
section, and
select the
Set Date/Time
button.
7.
Select
Close
to exit the dialog.
Follow the directions below to set the time and date by using unit menu:
Access the
Date and Time
command to set the unit time, using a
12
or
24-hour
format,
manually or from an attached GPS device. The time may also be sent from
Blastware
to
synchronize with the PC setting. Refer to your
Blastware Operator Manual
for more
information about synchronizing the time.
There are three
Date Formats
available:
mm-dd-yy
(Month – Day – Year),
dd-mm-yy
(Day – Month – Year), or
yy-mm-dd
(Year – Month – Day). The date format will
appear on all subsequent data, including
Event Reports
.
Содержание Minimate Pro Series
