Instantel Minimate Pro Series, Руководство оператора

Страница: 45 / 124

Minimate Pro Operator Manual
8
–1
8. B
ASIC
T
UTORIAL
In this basic tutorial, you will set up your computer and the supplied Instantel® Blastware
program to work together with the Instantel® Minimate Pro™ . You will then create a sample
Event using the Manual Record Mode , and transfer the Event file from your Minimate Pro to
the computer. Once you have completed this, you view and print the Event Summary Report .
Step 1: Install the Blastware Software
1. A copy of the Blastware program was shipped with the unit that was purchased; this will
either be the Blastware Compliance Module , which is provided with every delivered unit,
or the optional Blastware Advanced Module . A custom-programmed USB hardware device
lock is shipped with the Advanced Module which allows access to additional tools and
processes.
2. Follow the installation instructions within the Blastware Operator Manual .
Step 2: Connect the Geophone and Microphone to the Unit
1. Align and connect the ISEE or DIN Geophone(s) and/or the Linear Microphone to the
connections with the proper labels on the
Minimate Pro . Firmly hand-tighten each cable
connector with a quarter turn of the cable connectors. For unit identification, the top label on
the unit indicates if you have a
Minimate Pro4 , or Minimate Pro6 .
a. Connect the Geophone to the channel connector labeled VIBRATION (Blue) if
you have a Minimate Pro4 , or one Geophone to the VIBRATION (Red) and
one Geophone to the PRESSURE (Red/Blue) channel connectors if you have a
Minimate Pro6 . Connect the Linear Microphone to the channel connector
labeled PRESSURE .