Minimate Pro Operator Manual
11
–1
11. O
PERATOR
M
AINTENANCE
11.1. Operator Maintenance
Several levels of maintenance are available for the
Minimate Pro
with each level being dependent
on the type of repair required. Any maintenance not outlined below must be performed by your
Instantel Dealer Representative
or Calibration Site, or the
Instantel
Service Department. Any
maintenance performed on the unit that is not included in the list below will void the warranty as
specified at the beginning of this manual. Refer to Chapter 3, Handling Precautions prior to
performing any maintenance procedures.
The following outlines the maintenance procedures that may be performed by the Operator:
Storage
When storing the instrument, ensure that you charge the battery for at least 24 hours and then use
the
Disconnect Battery
command within the
Maintenance Menu
.
Replace Power Adapter
If required, replacement power adapters are available from your
Instantel Dealer Representative
or directly from
Instantel
.
Reload Operating System
To complete a field repair, a new version of the unit operating system must be downloaded to the
Minimate Pro
. If a new version of software is provided, refer to the
Blastware
Operator Manual
and follow the instructions for
Reloading the Operating System
.
Periodic Cleaning
Use compressed air to remove loose dirt and surface dust. Vacuum dust, dirt, and sand from the
Minimate Pro
monitor keypad area. Use alcohol to remove stains.
DO NOT
use paint thinners
and ketone solvents. These will damage the
Minimate Pro
. To avoid scratching the protective
cover and display, do not scrub the surfaces with abrasive cleaning materials including cleaning
pads.
Replace Dust Caps
If required, replacement dust caps for the connectors on the unit are available from
Instantel
.
Replacement dust caps located on the sensor cables must be replaced at an authorized repair
facility or at
Instantel
.
Maintenance as directed by an Instantel Service Technician
Occasionally, an
Instantel
Service Technician may authorize an in-field repair by the Operator.
Typically, an instruction sheet is provided and the technician guides the Operator through the
procedure.
Содержание Minimate Pro Series
