Chapter 2 Mechanical and Electrical Installation
- 25 -
Step
Diagram
Step 1: Punch holes in the base, and install
the horn.
Options: four M3x8 countersunk head screws
and four M3 hexagon nuts with flange
①
②
Step 2: Install
the IC card reader (optional).
A black acrylic plate has been installed in the
position reserved for the card reader before
delivery.
Options: four M3 hexagon nuts with flange
Step 3: Install the floor selector.
Options: four M3x8 cross recessed screws,
four M3 washers, and four M3x8 countersunk
head screws.
③
④
Step 4: Install the bracket.
Options: four M4x12 countersunk head screws
2.3.4 Installing the 15-Inch Wall-Mounted Touchscreen
Notes:
1） The floor selector consists of a touchscreen (MCTC-DDS-T2-IC)
and a vertical bracket (MCTC-DDS-T2-B2-IC).
2）
If no IC card reader is equipped, install a black acrylic plate in the
position reserved for the card reader.
3） Errors in the physical dimensions or differences in the surface
textures of different batches of products may exist. The physical
dimensions and surface textures are subject to the actual
product.
