Chapter 5 Parameter Description
- 78 -
B: Group control status of elevator 2
If it is on, elevator 2 is under group control. If it is off, elevator 2 is not under group
control.
C: Group control status of elevator 3
If it is on, elevator 3 is under group control. If it is off, elevator 3 is not under group
control.
D: Group control status of elevator 4
If it is on, elevator 4 is under group control. If it is off, elevator 4 is not under group
control.
E: Group control status of elevator 5
If it is on, elevator 5 is under group control. If it is off, elevator 5 is not under group
control.
F: Group control status of elevator 6
If it is on, elevator 6 is under group control. If it is off, elevator 6 is not under group
control.
G: Group control status of elevator 7
If it is on, elevator 7 is under group control. If it is off, elevator 7 is not under group
control.
DP: Group control status of elevator 8
If it is on, elevator 8 is under group control. If it is off, elevator 8 is not under group
control.
A
B
C
D
E
F
G
DP
Figure 5-2
Example of elevator group control status
For example, if only segments C and D of the LEDs are on, it indicates that the elevators
corresponding to these segments are under group control and other elevators are not
under group control.
Parameter
No.
Parameter
Name
Setting Range
Default Unit Property
FU-03
Current
traffic mode
LED 1 displays the current traffic
status. The value range is 0 to 4.
LED 2 displays the current zoning
status. The value range is 0 to 1.
0
-
●
After users enter the FU-03 menu, the LEDs on the keyboard indicate the current traffic
mode and zoning status. The two LEDs from right to left are numbered 1 and 2, as
shown in the following figure.