Safety Instructions
- 7 -
Disposal
WARNING
◆
Retire equipment by following local regulations or standards. Failure to comply may result in
property damage, personal injuries, or even death.
◆
Dispose of or recycle retired equipment by following industry waste disposal standards to
avoid environmental pollution.
Safety Signs
For safe equipment operation and maintenance, comply with safety signs on the
equipment, and do not damage or remove the safety labels. The following table
describes the safety signs.
Safety Sign
Description
◆
Read the user guide before installation and operation. Failure
to comply will result in an electric shock.
◆
Do not remove the cover at power-on or within 10 minutes
after power-off.
◆
Before maintenance, inspection, and wiring, cut off input and
output power, and wait at least 10 minutes until the power
indicator is off.
Approvals
Certification marks on the product nameplate indicate compliance with the
corresponding certificates and standards.
Certification
Mark
Directives
Standard
CE
EMC directive
2014/30/EU
EN 61800-3
LVD directive
2014/35/EU
EN 61800-5-1
RoHS directive
2011/65/EU
EN 50581
NOTE
◆
The above EMC directives are complied with only when the EMC electric
installation requirements are strictly observed.
◆
Machines and devices used in combination with this drive must also be CE
certified and marked. The integrator who integrates the drive with the CE
mark into other devices has the responsibility of ensuring compliance with CE
standards and verifying that conditions meet European standards.
The installer of the drive is responsible for complying with all relevant
regulations for wiring, circuit fuse protection, earthing, accident prevention
and electromagnetic (EMC regulations). In particular fault discrimination
for preventing fire risk and solid earthing practices must be adhered to for
electrical safety (also for good EMC practice).
◆
For more information on certification, consult our distributor or sales
representative.
