Inova SV 125, Руководство по эксплуатации

Страница: 76 / 392

Structure and function
SV 125
4016589
4--16
Version 1.0
4.2.12 Stopper insertion station (11)
X
W
Y
The stopper insertion station inserts the stoppers into the syringes.
The stopper pins press the stoppers from the transfer piece into the stopper turning
device (W), which then swivels over the insertion tubes. In the next step the inser-
tion rods (X) press the stoppers into the insertion tubes. The stopper turning device
swivels back.
The hold--down device (Y) is positioned above the syringes. The insertion rods
press the stoppers to the lower end of the insertion tubes. Then, the insertion tubes
and the stopper insertion rods move into the syringes on insertion position.
When they have reached insertion position, the insertion tubes move up, while the
stopper insertion rods remain on their position. Thus, the stoppers are inserted.
After the stoppers have been inserted, the insertion tubes and the insertion rods
move back to their starting position.