The unit has two lifting eyes on top to allow it to be lifted by a crane. These eyes may be removed once the unit has
been installed.
The unit has two feet on the bottom to avoid damage to the connectors when placed on a horizontal surface. These
feet may be removed if desired once the unit is fixed to a vertical surface.
3.4 Storage
If the unit is not installed immediately after receipt, the following points should be taken into account in order to
prevent damage:
- The package must be stored in the position in which the box arrived.
- Keep the unit free of dirt (dust, shavings, grease, etc) and away from rodents.
- Keep away from water splashes, welding sparks, etc.
- Cover the unit with a breathable protective material in order to prevent condensation due to ambient
humidity.
- Neither units stored at the manufacturing plant or in the client’s facilities must be subjected to climate
conditions other than those indicated in the Section ‘Environmental characteristics’.
- It is very important to protect the unit from chemical products which can cause corrosion, as well as from
salty atmospheres.
3.5 Conservation
In order to permit correct conservation of the units, they must not be removed from their original packaging until it
is time to install them.
In case of prolonged storage, the use of dry places avoiding, as far as possible, sharp changes in temperature is
recommended.
Damage to the packaging (cuts, holes, etc) prevents the units from being kept in optimum conditions before instal-
lation.
INGETEAM ENERGY S.A. accepts no liability in the case of failing to observe this condition.
3.6 Waste handling
During the various processes for installation, start-up and maintenance, waste is generated which must be handled
appropriately according to the regulations in the corresponding country.
At the end of the unit’s life, the waste must be processed by an authorised waste management company.
Ingeteam Energy S.A., in accordance with its policy of respect for the environment, will inform the authorised manager,
via this Section, of the location of components to be decontaminated.
Installation Manual
INGECON
®
SUN SMART TL
AAY2000IKI03
AAY2000IKI03
Rev. _
Date: March 2011
Page 18 of 64
18 of 64
of 64
