4.1 Content
This section contains safety instructions which must be followed when installing, operating and accessing the unit.
Failure to comply with the “Safety Instructions” may cause injury or even death or cause damage to the unit.
Read the “Safety Instructions” carefully before working on the unit.
4.2 Symbols
The warnings advise of conditions which may cause serious injury or death and/or damage to the equipment. The
means of avoiding the hazard to both people and the unit is indicated along with the warning.
The symbols and an explanation of their meaning can be seen below.
Danger, high voltage! Stay clear!
Warning of high voltage
: warns of high voltage which can cause injury or even death and/
or damage to the equipment.
General warning:
warns of conditions which can cause injury and/or damage to the equip-
ment.
Care, hot surface:
warns of the existence of hot parts which can cause serious burns.
The specific safety warnings and notes which affect specific tasks are included in each affected chapter and are
repeated and completed within each chapter in the corresponding critical points.
Please read this information carefully as it is written for your personal safety and to ensure the longest possible
service life for the unit and the devices to which it is connected.
4.3 Definition of the tasks to be carried out
Installation, start-up, inspection and maintenance operations may only be carried out
by personnel appropriately qualified and trained in electrical subjects (hereinafter
qualified personnel). You are reminded of the obligation to comply with the legislation
applicable to electrical work.
The fact that the various compartment housings are open in no way implies the ab-
sence of voltage. Only qualified personnel following the safety guidelines described
in this document may access the compartments.
4
Safety instructions
Installation Manual
INGECON
®
SUN SMART TL
AAY2000IKI03
AAY2000IKI03
Rev. _
Date: March 2011
Page 20 of 64
20 of 64
of 64
