To comply with each directive, it is sufficient to comply with the parts of the appropriate harmonised standards which
are applicable to our equipment.
1.3.1.1 Low Voltage Directive
INGECON
SUN LITE TL units comply with this directive by means of compliance with the applicable parts of
harmonised standard
EN 50178 Electronic equipment for use in power installations
.
1.3.1.2 Electromagnetic Compatibility Directive
INGECON
SUN SMART TL units comply with this directive by means of compliance with the applicable parts of
harmonised standards:
-
EN 61000-6-2 Electromagnetic Compatibility. Part 6-2: Generic standards - Immunity for industrial environments
.
-
EN 61000-6-3 Electromagnetic Compatibility. Part 6-3: Generic standards - Emission standard for residential,
commercial and light-industrial environments
.
Compliance with these standards calls for compliance with limits and procedures in other standards.
1.3.2 VDE0126-1-1 disconnection device
In countries such as Germany, Portugal and France, incorporating a device of this type facilitates compliance with
the regulations in force for photovoltaic and microgeneration facilities.
As such, our units comply with the standard:
-
VDE 0126-1-1 Automatic disconnection for generating installations connected in parallel with the low
voltage grid
1.3.3 Regulations for connection to the ENEL Distribuzione grid
In Italy, to connect to the company ENEL’s grid, it is necessary to comply with the regulations the company de-
mands.
Hence our units comply with the applicable part of standard:
-
RTC alle rete BT di Enel Distribuzione
.
Compliance with this standard must be requested on ordering the unit.
1.3.4 Engineering Recommendation G83/1
In the United Kingdom there is document G83/1, which recommends the characteristics a microproduction genera-
tor needs to have:
-
Recommendations for the connection of small-scale embedded generators in parallel with public low-voltage
distribution networks
.
Compliance with this standard must be requested on ordering the unit.
1.3.5 Compliance with Australian and New Zealand regulations
The two standards to be met in Australia are:
-
AS/NZS 3100
.
General requirements for electrical equipment.
-
AS/NZS 4777
.
Grid connection of energy systems via inverters.
Compliance with this standard must be requested on ordering the unit.
Installation Manual
INGECON
®
SUN SMART TL
AAY2000IKI03
AAY2000IKI03
Rev. _
Date: March 2011
Page 11 of 64
11 of 64
of 64
